conditioning Archives | Elite Electric, Plumbing & Air

Air Conditioning Repair Done Right

When an air conditioning or HVAC pro comes to your house, there are numerous processes they go through when diagnosing any system issues. A few of these steps can be successfully accomplished by any homeowner before you call the pros.

By troubleshooting your system with the following tips, you could save yourself time and money in emergency HVAC repairs. Here are three tips form the pros to help you troubleshoot your air conditioning system.

First, Check Your Thermostat

This may sound like a simple troubleshooting item and you might even roll your eyes, but you’d be surprised by how many issues with the air conditioning units turn out to be problems with the thermostat. Check first to be sure your thermostat didn’t get flipped into the “off” position.

This can happen if it gets bumped or the system resets itself due to a power outage. The second thing to check is the batteries. If the power supply to your thermostat fails, the HVAC will be unable to function properly.

If your thermostat has no power even after you’ve changed the battery, check the wiring hooked up to the unit. If it comes detached or has been chewed through, your thermostat and your unit will function improperly. Finally, check to ensure all settings are where they should be and that the day and time is accurate.

Change Air Filter Frequently

A surprising source of air conditioning problems is the air filter in your unit. All HVAC units circulate air through a filter to clean the air you breathe. During the process, particles of dirt, dust, dander, mold, and allergens build up in the filter when they are removed from the air. Over time the dirt and debris build-up and eventually clog the air filter.

Air filters are made to last for thirty days before needing to be changed. If they are left too long and get clogged, your HVAC unit will have to work much harder to circulate air through your house. As a result, you may experience less cooling than you’re used to because of how hard the unit must work. To put less strain on your unit, change your air filter every month to ensure optimal working conditions.

Does Your AC Need Cleaning?

When your AC unit, such as the intake fan box outside, get covered by dirt and debris, your system will be unable to function properly. Gunky central AC systems are at risk of overheating, especially when they are already working hard during the hottest days of summer.

If you tried to run a marathon at the height of summer wearing a winter coat, you’d understand what it feels like for your HVAC unit to run during the summer when it’s covered in dirt and debris.

Frequently cleaning your system by hosing away dirt and removing large sticks and twigs is an important part of system maintenance.

Dependable, Professional HVAC Technicians

Elite Electric & Air has been serving Port St. Lucie, FL area residents for over thirty years. They offer 24/7 emergency service, have a 100% satisfaction guarantee with upfront pricing and on-time arrival. Elite offers a range of services from electrical installation to HVAC maintenance and repairs.

The Right Tools for the Job

Maintaining an HVAC system is complex work. Many people do not realize the intricacies that are involved with making sure an HVAC is working properly. It can be a dangerous decision to try and work on your system yourself, especially with little to no prior knowledge on the subject.

HVAC systems are so intricate in fact, that many HVAC companies will have many different types of workers. Each worker will specialize in a different area of HVAC work.

The different types of HVAC specialties include:

Automotive HVAC technician
HVAC Engineer
HVAC Installer
HVAC Mechanic
AC Technician

Each specialty has its own set of tools needed for the job too, and some of them you may not have lying around in your garage. Be sure to keep reading to learn more about what tools are needed for what jobs and when to call in a professional for a gas furnace repair.

The Necessary Tools for the Job

It is almost expected that whenever you call in a technician of any kind, that the tech will be equipped with the bare minimum tools. These tools include a hammer, screwdriver and set of pliers. An HVAC technician is no different, but he should also come prepared with a tape measure and most likely a stepladder, wire strippers, and a thermometer as well.

Every professional should always show up with these essential tools in his toolbelt. If you call someone to come out and look at your HVAC system and he doesn’t have these tools on him, he likely isn’t a professional.

It is best to go through a well-known HVAC company than to trust a flyer that gets dropped in your mailbox by a self-employed HVAC technician. Sometimes these workers actually know what they’re talking about, but if you go through a company then you know you are getting the best quality work.

Tools for Specialty Jobs

Along with the essential tools for the job, every HVAC technician should also come prepared with a set of specialty tools for the job. No matter what his specialty is, if he has the below list of specialty tools, he should be able to fix even the unforeseen problems that arise during maintenance.

The most important specialty tools every HVAC tech should have are:

Multimeter
Thermometer
Cordless Drill
Sawzall
Manifold Gauge
Extension Cord
Tubing Cutter

A cordless power drill is by far one of the most useful tools for working on an HVAC system. It gets used on almost every job to repair and install new equipment. Out of all of the tools though, the multimeter, thermometer, and manifold gauge are some of the most important and most used specialty tools.

Each one of these tools properly assesses the HVAC system to let the technician know where a problem could potentially be coming from. Taking the guesswork out of the job so he can get the job done properly and quickly.

Safety Tools Required for the Job

Above all else, a professional HVAC technician will make sure to take the proper safety precaution tools before even beginning the job. It is vital he comes prepared with slip-resistant shoes, as well as gloves and an arm sleeve just in case a sharp object comes down on his arms or hands.

On top of these items, a professional will always assess the situation at hand and go over his tools before starting a job. He won’t take shortcuts and will ensure he gets the job safely and properly within a timely fashion.

Not only this, but he will be covered by his company if something does happen to you, him or the house. The company will step in and cover any issues that arise until everything is as it should be.

Elite Electric & Air is Here to Help

Port St. Lucie’s local HVAC company, Elite Electric & Air is open 24/7 to answer any questions and concerns you might have. They have been helping customers around Port St. Lucie, FL for the last thirty years, and with great reviews. Their expertly trained technicians provide peace of mind to their customers because their focus is always on safety and quality work.

Tag: conditioning

Expert Tips for Helping Your Home With Air Conditioning Repairs